Welcome to Jiangxi People Transmit & Transform Electric Co.,Ltd Official website!
Product Series
Related Products
SCBH15 Series Amorphous Alloy Dry-Type Transformer
Amorphous alloys are prepared using advanced rapid‑cooling technology: a liquid melt containing elements such as iron, cobalt, boron, and silicon is sprayed at high velocity onto a rapidly rotating substrate, where it undergoes quenching to form thin ribbons with thicknesses ranging from 0.02 to 0.04 millimeters. These ribbons exhibit excellent soft magnetic properties, corrosion resistance, wear resistance, and a relatively high electrical resistivity.
Category:
Product Details
Amorphous alloy is an advanced rapid‑cooling technology in which a liquid melt of elements such as iron, cobalt, boron, and silicon is sprayed at high velocity onto a rapidly rotating substrate; upon swift cooling, it forms an ultra‑thin ribbon only 0.02–0.04 mm thick. This material exhibits excellent soft magnetic properties, corrosion resistance, wear resistance, and a relatively high electrical resistivity. Compared with cold‑rolled grain‑oriented silicon steel laminations, amorphous‑alloy transformer cores offer the following advantages: (1) Amorphous alloys lack a crystalline lattice structure and are isotropic soft magnetic materials, resulting in lower excitation power; (2) The material contains no structural defects that impede domain wall motion, leading to hysteresis losses far lower than those of silicon steel; (3) Its electrical resistivity is extremely high—approximately 3 to 6 times that of silicon steel—greatly reducing eddy current losses, with per‑unit eddy current losses amounting to only 20%–30% of those in silicon steel. The SCBH15 series amorphous‑alloy dry‑type transformers represent a new generation of low‑loss, energy‑efficient distribution transformers. By integrating the technical strengths of amorphous‑alloy transformers and conventional epoxy‑cast dry‑type transformers, and employing a novel structural design, this product achieves significant loss reduction, with no‑load losses approximately 70% lower than those of standard Series 10 dry‑type transformers. In addition, the product features a compact structure, an aesthetically pleasing appearance, low noise levels, minimal temperature rise, strong overload capacity, stable electrical performance, and convenient maintenance.
Terms of Service
- Altitude not exceeding 1,000 meters (when above 1,000 meters).
- Ambient temperature: maximum temperature +40°C, monthly average maximum temperature +30°C; minimum temperature -25°C, annual average maximum temperature +20°C.
- The waveform of the supply voltage is close to a sine wave; the three-phase supply voltages are essentially symmetrical.
- When installed and operated in a domestic setting, it does not generate significant environmental pollution during operation.
Product Features
The SCBH15 series amorphous‑alloy dry‑type transformers offer numerous advantages, including low no‑load losses, oil‑free operation, self‑extinguishing flame retardancy, moisture resistance, and maintenance‑free operation. Currently, this product line is widely used in airports, railway stations, urban subways, high‑rise buildings, power plants, and other applications, serving as a replacement for conventional dry‑type transformers—particularly in flammable and explosive environments and in areas with tight power supply conditions. Its specific features are as follows: Low energy consumption and outstanding energy‑saving performance: Utilizing isotropic soft magnetic conductive materials, these transformers exhibit low magnetization power, high resistivity, and minimal eddy‑current losses; the amorphous‑alloy core further reduces no‑load losses and no‑load current to one‑third of those of silicon steel laminations. Compared with the values specified in GB/T 10228, no‑load losses are reduced by 75%, significantly lowering operating costs and delivering exceptional energy efficiency. Excellent corrosion resistance: The amorphous‑alloy core is fully encapsulated in resin and supplemented with high‑temperature‑resistant silicone gel, effectively preventing corrosion and the shedding of amorphous‑alloy debris, thereby providing reliable protection for both the core and windings. Low noise levels: To minimize operational noise, the design carefully selects an appropriate working magnetic flux density, optimizes the core and winding structure during manufacturing, and employs specialized noise‑reduction materials, resulting in noise levels far below the requirements of the national standard JB/T 10088. Strong short‑circuit withstand capability: Featuring a three‑phase, three‑limb core structure with a compact and well‑organized layout. Low temperature rise and long service life: Thanks to its low temperature rise and excellent heat dissipation, under forced air‑cooling conditions, the transformer can operate continuously at 150% of its rated load; additionally, the optional temperature‑control protection system further enhances operational safety and reliability.
Main Technical Parameters
Technical Parameters of the 10 kV-Class SCBH15 Series Amorphous Alloy Dry-Type Transformer
Rated Capacity (kVA) |
Voltage level |
Connection Group |
No-load loss (W) |
Load loss, Class F (W) |
No-load current (%) |
Short-circuit impedance (%) |
||||
High pressure |
High-voltage tap range |
Low voltage (kV) |
100℃ |
120℃ |
145℃ |
|||||
30 |
6,6.3; |
|
0.4 |
Dyn11 |
70 |
670 |
710 |
760 |
1.6 |
4.0 |
50 |
90 |
940 |
1000 |
1070 |
1.4 |
|||||
80 |
120 |
1290 |
1380 |
1480 |
1.3 |
|||||
100 |
130 |
1480 |
1570 |
1690 |
1.2 |
|||||
125 |
150 |
1740 |
1850 |
1980 |
1.1 |
|||||
160 |
170 |
2000 |
2130 |
2280 |
1.1 |
|||||
200 |
200 |
2370 |
2530 |
2710 |
1.0 |
|||||
250 |
230 |
2590 |
2760 |
2960 |
1.0 |
|||||
315 |
280 |
3270 |
3470 |
3730 |
0.9 |
|||||
400 |
310 |
3750 |
3990 |
4280 |
0.8 |
|||||
500 |
360 |
4590 |
4880 |
5230 |
0.8 |
|||||
630 |
420 |
5530 |
5880 |
6290 |
0.7 |
|||||
630 |
410 |
5610 |
5960 |
6400 |
0.7 |
|||||
800 |
480 |
6550 |
6960 |
7460 |
0.7 |
6.0 |
||||
1000 |
550 |
7650 |
8130 |
8760 |
0.6 |
|||||
1250 |
650 |
9100 |
9690 |
10370 |
0.6 |
|||||
1600 |
760 |
11050 |
11730 |
12580 |
0.6 |
8.0 |
||||
2000 |
1000 |
13600 |
14450 |
15560 |
0.5 |
|||||
2500 |
1200 |
16150 |
17170 |
18450 |
0.5 |
|||||
1600 |
760 |
12280 |
12960 |
13900 |
0.6 |
|||||
2000 |
1000 |
15020 |
15960 |
17110 |
0.5 |
|||||
2500 |
1200 |
17760 |
18890 |
20290 |
0.5 |
|||||
Tags:
SCBH15 Series Amorphous Alloy Dry-Type Transformer
Product Inquiry
If you are interested in our services, please fill out the form below and we will contact you as soon as possible.